Parts are covered bore to butt stock below
This information has not been provided by Daisy but is a compilation of experience based on actual part swaps and information forwarded to my by others. If you find any of the information is correct or have additional information to add to this post then please email us.The best source of parts is directly from Daisy, but Daisy does not have parts interchangeability capability so if you request parts for an out of production gun they will tell you they are not available when in reality they may still be available due to being used on a still in production gun. If you request the part by part number they can look it up and will sell the part if it is being used on a still in production gun. To find the part number of the item you need checkout the part posts on this site, they provide schematics and part lists with part numbers for the parts that Daisy sells. The Daisy website does not list most of the parts that are available for order but you can call them at 479-636-1200 to place an order for parts not listed on their website.
Other Sources of discontinued parts:
JG Airguns
Ronno6 at GTA
Parts can also be found on ebay and Amazon but I would check with Ronno6 for his updated seal kit for older 880s
Front Sight Insert:
Compatible Years:
AllCompatible Models:
Winchester 1977 - Years AllModel 35 - Years All
Daisy 901 - Years All
Daisy 922 - Years All
Daisy 917 -Years All
Daisy 822 -Years All
Barrel Shroud:
NOTE: While most year and model shrouds are interchangeable there is a consideration to be made due to the forearm attachment methods. Over the years Daisy has used three different forearm attachment methods, a prong and loop method where the frame had prongs that hooked into molded rectangular loops on the inside of the forearms (used on early pre-1985 models), a hook and slot method where the shroud has slots on either side and the forearms had hooks that locked into the slots, and finally plain forearms that simple attached with the common screws (wood forearms like on the 822). The only limitation is that the hook-and-loop shroud and forearms are not interchangeable. Frames with prongs can use shrouds with slots, forearms with hooks must use slotted shrouds, forearms without hooks or slots can use any shroud.Compatible Years:
AllCompatible Models:
Daisy 901 - Years AllDaisy 922 - Years All
Daisy 917 -Years All
Daisy 822 -Years All
Barrel:
Compatible Years:
1972-1983, 1984-presentCompatible Models for 1984 and latter 880s:
Winchester 1977 - Years AllDaisy 901 - Years All
Daisy 922 - Years All
Daisy 917 -Years All
Pump Handle:
NOTE: 1972-1973 Used a clip to retain the pump arm and will not be retained on other models. 1974- July 1983 used a plunger to retain the pump arm and can be used on 1974 to present guns but on guns with a retaining spring the spring must be removed. August 1983 - Present pump arms will not be retained on earlier guns.Compatible Years:
AllCompatible Models:
Daisy 922 - Years AllDaisy 917 -Years All
Daisy 822- Years All
Piston Assembly:
NOTE: Although the earlier years piston assemblies are interchangeable there are subtle differences, but I have not seen a performance difference.O-ring Size: 113
Compatible Years:
1972 - November 1991, December 1991 - PresentCompatible Models:
Daisy 901 - December 1991 - PresentDaisy 922 - 1972 - November 1991, December 1991 - Present
Daisy 917 -1972 - November 1991, December 1991 - Present
Daisy 822- 1972 - November 1991, December 1991 - Present
Compression Tube:
Compatible Years:
1972 - November 1991, December 1991 - PresentCompatible Models:
Daisy 901 - December 1991 - PresentDaisy 922 - 1972 - November 1991, December 1991 - Present
Daisy 917 -1972 - November 1991, December 1991 - Present
Daisy 822- 1972 - November 1991, December 1991 - Present
Abutment:
NOTE: The chamber seal for compatible years are all the same. The abutment plugs are also the same for compatible years. For the early abutment style the seals are no longer manufactured. Ron at GTA has redesigned the abutment to utilize the new seal. Some other models and years such as the 922 utilize the same abutment for the earlier model guns but I do not have the specifics. The model 35 may also use the same abutment of the later model guns but I do not know for sure yet.Compatible Years:
1972 - November 1991, December 1991 - PresentCompatible Models:
Daisy 901 - December 1991 - PresentDaisy 822- 1972 - November 1991, December 1991 - Present
Valve Body:
NOTE: The valve body O-Ring is the same for all years and the piston.O-ring Size: 113
Compatible Years:
1972-1983, 1984-November 1991, December 1991 - PresentCompatible Models:
Daisy 901 - December 1991 - PresentBolt:
NOTE: I'm pretty sure the bolt changed sometime between December 1991 and 1999 to the latest design.Compatible Years:
1972-1983, 1984-November 1991, December 1991 - PresentCompatible Models:
Daisy 901 - December 1991 - PresentDaisy Model 35 - December 1991 - Present
Winchester 1977XS - 1999 - Present