The Daisy Base
Modifications
Home / Daisy Models / 1977XS /
Modifications
Daisy 880 Part Compatibility
By admin | | 0 Comments |
Find out what model and years parts are interchangeable and aftermarket sources for parts
Tuning Your Daisy Pumper
By admin | | 0 Comments |
Tune your Daisy Pumper to maximize accuracy and performance.
Spring Tester
By admin | | 0 Comments |
A spring tester is useful for identifying the spring rate for springs in the poppet, the hammer spring and other springs contained in the air rifle
Daisy Poppet Disassembly and Modification
By admin | | 0 Comments |
Poppet Disassembly and Modification is useful for fixing leaks, reducing valve lock, and decreasing lock time
Putting Metal Receivers On New Valvebodies
By admin | | 0 Comments |
Adding metal receivers to am 880 or 1977 will increase rigidity, provide a stronger base for optics mounting, and allow for adding a wood stock
3D Printed Daisy Stocks
By admin | | 0 Comments |
3D Printed Stocks can be adjusted for length-of-Pull and printed from Wood filaments to look like an actual wood stock
Wood Stocks For The Daisy 880
By admin | | 0 Comments |
Finally a way to install Off-The-Shelf stocks on the 880 family of guns
Daisy 880 Custom Bolt
By admin | | 0 Comments |
A custom bolt allows the use of custom probes that seal better than factory and allow tuning the probe taper angle as well as pin length.
Daisy 880 Family Muzzle Adapters
By admin | |
Vintage Daisy 880 Elastomer Replacement
By admin | | 0 Comments |
Daisy Elastomer replacement
Printed Daisy Forearms
By admin | | 0 Comments |
Print Forearms for the 880 series of guns and the Winchester 1977
Red Rider Scope Mounts
By admin | | 0 Comments |
Improve the accuracy of your Red Rider with an optic
1 2